Anyway, you can use a free program on the internet for creating knitter's graph paper, or use an Excel spreadsheet too. This is just another easy way.
I tried using a basic graph and typing in the symbols typically used in hand knitting lace patterns. Probably due to my ignorance, I couldn't get the symbols to print dark enough. So I decided plain graph paper would work fine and I would draw in my own symbols by hand.
Here's how to get some nice graph paper;
1. Open Stitch Designer.
2. Accept the 40 st x 40 row default or add/subtract stitches and rows to suit your purpose.
3. Use the paint bucket to dump white into the work space.
4. Under Options, change your tension to 4 stitches and 5 rows to the inch so that the grid is large. You may be able to control the size of the grid by just adjusting in the print options (#6 below) regardless of the tension your file is set at. Haven't tried it.
5. File...print. Save as graphpaper in a place you can find it again. I have a misc file for that purpose.
6. You have some options--- before actually printing--- under Available Formats. Choose stitch pattern picture, under page setup choose portrait for vertical lace and landscape for horizontal repeats. Choose 100% or larger. You can choose which way the rows and stitches are numbered. I asked for darker color demarcation, but it didn't seem to make a difference when I printed it out different ways.
7. DAK may use several pages to print out what you have specified. I chose the one that made the most sense for the design I planned to do and printed out only that page. (The one starting in the lower right corner for stitches and rows made the most sense to me.) Fianally, click Print. If you don't get exactly what you want, fiddle around with the settings.
Hope this helps someone. I'm going to a knit-in in Princeton on Saturday and wanted a chart for a project I want to try. If it turns out, I'll report.