machine knitting midgauge standard bulky machknit knit machine-knit patterns
Tuesday, November 26, 2013
One of the machine knitting guilds in Minnesota makes them and sells two at a time in a nice mesh bag to earn money to buy yarn for charity projects. Nifty idea.
How to make: you will find slightly different versions on the internet. Here's how I did mine. I used 100% wool throughout. First I wound a ball by hand, about 3-4 inches in diameter. They shrink quite a bit when felted. I tacked down the yarn around the ball so that it wouldn't come unraveled in the wash. The bottom ball shows how I hand sewed/tacked down the yarn. (Not a very good picture, but you get the idea.) I then wrapped the ball with wool roving, poking it into the ball with a needle felting needle in a few places. Lots of people put the ball in an old nylon stocking and tie the ends for felting. I tried that, and the roving grabbed onto the nylon as tight as can be. The roving and the nylon became one! It took a week, a little at a time pulling, coaxing, ripping the nylon off, inch by inch. Lots of the roving came along with the nylon. No fun!
So for the next ones, I was trying to come up with a solution to this issue. I had purchased a bag of apples and they came in a nylon-ish, slippery, holey, woven bag. Voila! I used that, one dryer ball to the bag with lots of room around it and tied the ends before throwing into the washing machine for felting. Worked like a charm. No sticking. So, that little hint will save you hours of frustration.
You might want to felt your balls a few times so that they are sort of heavy, tight and dense. (In case you were wondering, I don't think acrylic centers would work at all, nor would super wash wool.) The ball pictured at the top will go through a few more washings before I use it regularly in the dryer. Use them, 2 or more at a time, with each load and see if they don't work well for you. Maybe do your laundry when you don't need peace and quiet in the house because there will be some banging around in the dryer.
Why did I call them "spheroids"? I can hardly believe this, but Blogger wouldn't upload the picture of the "dryer balls" but would upload the same picture re-named "dryer spheroids". Hmmmm.......
Wednesday, November 6, 2013
Monday, November 4, 2013
Our machine knitting guild has an annual holiday newsletter that has lots of ideas for gift giving or just for fun. This is my contribution this year. Easy and quick. You could probably get a lot more creative with the idea, but it's a starting point anyway. Great for using up bits of yarn that you don't know what else to do with.
Stocking Stuffer Idea: Scented Sashays for Closets
Package(s) of scented filler (I got mine at Michaels)
Lace trims that are already ruffled and ribbons, other decorative items; Any yarn, a few ounces; Sewing machine
Any knitting machine
Guestimate your gauge so that you arrive at about 4” x 4” for the square and large enough for any shapes you might use. Knit two sides separately with a closed cast on and a permanent bind off. For the heart, cut a template out of cardboard. Trace the heart onto one of the knit pieces. (Ok to use any writing implement if you sew inside of the lines.) Pin lace extending toward the center around the perimeter of the square/outline of the heart. (See diagram below) Sew with sewing machine close to the edge. Put the other side on top leaving a space to turn right side out. Knit a little I cord for a hanger or use ribbon, again tucked to the interior. Machine sew the front to the back remembering to leave a space to turn right side out. For the heart, sew just inside your tracing so the ink doesn’t show. It is easier to cut off the excess knit fabric after you’ve sewn your shape. Turn right side out. Stuff with the scented filler. Sew the opening shut by hand.
Other ideas: use a fairisle pattern, tuck stitches, lace, words or names. Use different shapes.