My Gustavus scarf didn't work out so well, because I was having such a time with static. Had to rip it out several times and got discouraged, so I decided to do hotpads instead.
By this time, I had done all my anti-static measures and they worked. If you've had static, try putting yourself and your yarn on anti-static mats. Northtipton also has some copper mesh that helps. I sprayed the yarn with Lori Lynn Yarn spray, put wax on the mast, ran a dryer sheet over the needle bed periodically, ran my humidifier and also slathered hand lotion on my hands every 15 minutes. The combination of all these measures evidently worked. No more mispatterning or dropped stitches. Man, hate that static.
The hotpads are 100% cotton and the floats are so numerous that they provide the insulation. Kind of dumb, but these were gag gifts anyway. I did them on the standard gauge machine with 3 strands of really thin cotton for each color. They're 70 stitches wide x 180 rows long, about 10" square. I started and ended with waste yarn, doubled them lengthwise and kitchener stitched the ends together. I mattress stitched the side seams and put a 3 stitch I cord in one corner (80 rows). Not so difficult!!!
This is the front of #1
This is the back of #1.
This is the front of #2
This is the back of #2.
Gustavus' roots are Swedish Lutheran, so I thought the snowflakes would be appropriate or at least ok. (Lots of good floats, anyway.)
Yea for DesignaKnit, but it's time to move on to something else.
machine knitting midgauge standard bulky machknit knit machine-knit patterns
Subscribe to:
Post Comments (Atom)
4 comments:
Hello, I have been having mispatterning issues. I have tried yarn spray, cleaning my machine, oiling, checking spongebar and the tension still seems to be an issue. Any other advice would be wonderful, thank you!
What machine brand do you have? Sounds like you are trying all the right things.
Hello, I have a sk840 electronic machine.
This would be a Silver Reed, right? I have a Silver Reed 860 hooked up to DesignaKnit. I really don't have a clue as to what would cause your machine to mispattern. I know that I have to run the carriage slowly or the pattern skips with mine. Also, must go beyond the edge of the knitting a bit. But, I don't think this helps you much. Sorry. Is there a dealer nearby that you could contact? Good luck!!!
Post a Comment