I posted this on Ravelry in the machine knitting group, but some people may not belong. So I thought I'd repeat my post here hoping it will help someone. I should give credit to my friend, Bruce, who taught me this trick.
Some people have asked how I can make hats “in minutes” on my knitting machine. Here’s how.
Some people have asked how I can make hats “in minutes” on my knitting machine. Here’s how.
- For my charity hats, I used a midgauge which requires less stitches and rows than a standard. Sometimes I had to double the yarn. A bulky would even be faster.
- The trick: Buy a metal rod that is the length of the width of your knitting machine. (Very cheap at hardware store.) Should be substantial in weight.
- Hang your cast on comb BACKWARDS making sure each loop gets a tooth of the cast on comb.
-Pull out the rest of the needles so they will knit.
-Knit 2 times the length of the hem.
-Bring out every other needle all the way.
- Hang onto the cast on comb with your left hand pulling down slightly
-place the metal rod mid way, horizontally.
-Pull up the cast on comb up over the rod, hang loops so that each needle that is all the way out gets a loop. Takes some practice at first. Remove cast comb by tilting it so that the stitches land properly. If you miss some, use a single transfer tool to hang them.
-The rod is still in the hem and acts as an even weight throughout. Set the cast on comb aside.
-Knit the height of the hat and transfer every other stitch to its neighbor. Push out of work needles to out of work position so they do not knit but you don’t have to move the stitches inward.
-knit one row and take stitches off (I try to plan so the last row goes left to right because I am right handed) with a double eyed needle and enough of a yarn tail to sew the seam. Remove metal rod. It will start to fall down anyway. The stitches at the top cinch in just fine, especially if you are going to attach a pom pom which hides the opening. Seam the side.
The inside of the hem is not especially beautiful, but show me a kid who cares.
7 minutes knitting time! (Works with any machine) Sorry I don’t have pictures or a video. Hopefully my words are clear enough. Write to me if questions. PS I used the free pattern on my blog here and pictured below.
