Ruffles on the Knitting Machine

Slisen's post today  has the pattern for her adorable baby blanket with tuck hearts and a ruffled edge:  http://slisen.blogspot.com/
It's especially sweet in that pale yellow color.  Sandy hand pulled her needles to make the ruffles, a really labor intensive prospect. Sandy's pattern was published years ago in Knitwords----can't remember which issue right now.  Whomever received that blanket should know what a labor of love that was!!!

Since the theme for the contest this year at Purls of Joy (April, Princeton, MN) is "ruffles", I thought I'd post a little about a more automatic method of making ruffles.  You can try this method for doing ruffles on the machine that takes about 1/4 the time as hand pulling needles. 

These directions are for Brother electronic machines and use the part buttons to have the machine not knit the short side of the ruffle.  You could adapt it for a punchcard machine and if you speak different machine languages, you could probably convert it to a different machine.

The pattern is 24 st x 26 rows.  Copy the ruffle pattern and use whatever means you use to get the pattern to your machine (DAK, PPD, inputting the pattern by hand, etc.) The horizontal stitches knit and the vertical ones don't. 

Position the pattern at L7 to R 7. Cast on with waste yarn and K a few R over N L7 to R7 at desired tension.

E wrap cast on over these N left to right with MC right over the waste yarn and K 3 R. 

CAL, turn on machine to row zero, KC II, knit to the right outside the turn mark. Push in both part buttons and K to desired length. This will be hundreds of rows for a baby blanket. This is one time you can measure the length of the ruffle while it's on the machine.  Do a few extra rows so that you don't come up short and if doing a baby blanket, add rows to turn the corners.  

 Weight the ruffle slightly with your left hand while running the carriage with the right hand. (Saves time not having to move up the weights.)

When desired length is reached, bind off with latch tool on one of the plain rows. Run in yarn ends. Purl side can be the right side. The ruffle will look a little wild and out of control if you don't do any of the suggestions below.

Before felting:

After felting:  

If you are felting this ruffle, there is no need to do anything to your edge. It forms its own edge when felted.

If you are not felting the ruffle, you can wrap extra yarn, one or two strands, around the outer edge every other row. Or, you can crochet around the long edge until it behaves itself. (Pretty tedious and time consuming.) 

Another option--- on the long edge, transfer the second stitch in to the stitch to the right of it and transfer the original 4^th stitch to the 3^rd every other row . It makes a lacy edge and helps to minimize the curl. 

The vertical holes are noticeable on this yellow example.  They are a result of not wrapping the yarn before turning around and knitting the other way.  If you don't like them, wrap the yarn on the end needle before knitting back to the right.

If the whole ruffle is way too ruffly, change the pattern to knit more plain rows before repeating the pattern.

Maybe you can think of other ways of taming the beast.  Ruffles are kind of fun...if you don't get too much of them.  And, they do add a lot to baby clothes.

 

Machine knit scarf/shawl

I should be getting my tax info ready for the accountant....but I have to really be in the mood to do that stuff.  Maybe if I do a post, I'll get my head around it.  Bah.

I got this idea from Linda's blog:

http://myblueheavenknits.wordpress.com/free-patterns-page/projects-ruffled-swirl-scarf/

but I made some modifications to the pattern.  Used my late departed bulky machine, T10, and instead of the 22 stitches she used, I worked with 34 stitches to make more of a shawl.  It took two skeins of Joanne Fabrics' Sensations Boucle', the smaller skein which is 6 ounces, I think.  (or 9 ounces???)  Also, every 10 rows or so, I knit two extra plain rows.  It seemed to be going so slowly, I got impatient and I didn't really want it so ruffly.  I just kept on knitting until most of the yarn was gone and there was enough to bind off with.    Actually, instead of letting the ends just hang down as is pictured,  I usually tie it once and it stays on well.  It curls slightly and hugs the shoulders.

Sorry for the dumb, out of focus picture, but maybe you get the idea.   So easy!!!  Didn't steam it, let the edge roll slightly. I love the colors in this yarn and when it was so cold here, having this scarf/shawl around my shoulders really kept me toasty.

Certainly got enough of short rowing for the time being....

More Machine Knit Tiny Teds

You can check my previous blog post on how to make these cuties.  I seemed to get a little better at making them, i.e. better proportions,  as time went on.  Rather than knitting ears on the machine, I used the same technique to 'soft sculp' the ears by hand sewing the corners of the head.  If you know a charity that gives to little babies, this is a nice project.  After doing 12 of them, I had to move on, but maybe I'll make more later. (Check out the Feb. 8 blog post for directions.)

Cheat Sheets for Silver Reed Knitting machines

I mentioned on Ravelry that I had had a tough time memorizing the Silver Reed settings.  I am a dyed in the wool Brother lover, and the Silver Reed seemed pretty foreign to me.   So I bought a 3" x 5" card stock spiral notebook to write down in simple terms what the steps were for the most used settings.  This way I didn't have to keep thumbing through the manual.  Feel free to use these however you wish.  Right click, copy and paste into an image processing program (like PAINT, for PC users).  Hope it helps you out.  (If hard to read, click on the image and it should enlarge.)