Two Machine Knit Ski Headbands Done!

I still have my charity birthday hat resolution going. Knitting the hats every now and then, hoping I'll reach my goal by next December. This is the latest addition to the collection---a really quick knit for a ski or cold weather headband. It's 17 degrees (Fahrenheit) below zero as I type, so anything warm is appealing. Winter hasn't shown any signs of relenting yet.

This was a 15 minute headband! Seriously! I have knit two sizes, but since it goes so quickly, you could adjust for the recipient. Knit rows of 1 x 1 rib, change to Fisherman's rib, then knit more 1 x 1 rib. Machine: Brother Standard gauge with ribber. I used Mary Lou's Symphony yarn, which is no longer manufactured.
Finished sizes: Child 16", Adult 17" unstretched. Knitting is very stretchy but you'd want it snug to stay on!

The basic idea for this headband came from an old (1998) Purls of Joy seminar book, the pattern was written by Karen Hoovestol. I adapted the pattern for my own use, changing the way it is cast on and bound off, also the number of needles used, rows knit and adding a child's size. I'm thinking that even though the pattern is at least 13 years old and a pattern given out for a seminar that I probably should not have given specifics. (Sorry about that. I removed the pattern.) I don't know how to get ahold of Karen to ask permission to use it, so I'm feeling more comfortable just describing it a little. I think you could figure out how to make it and it would be nice if you could make some for charity too.

An aside...Because it's too cold for man or beast, I've been walking inside the house. I do a round trip through living room and kitchen. It's about 40 steps. Am aiming for 20 rounds each day. Not so much, but better than nothing and it warms a body up for a while. How I love winter!

When Your Knitting Machine Gives You Lemons...

Make a pillow. How lucky was this? I had enough rows to make something out of this ex-scarf, rows that had the correct patterning. First I counted rows and marked off the same number for "front" and "back" with strands of red yarn. If you click on the picture it should enlarge and you will be able to see better where the red yarn markers were stranded through.



Then I stitched across where the red yarn markers were---twice---and surgically removed the messed up snowflakes. Pinned front to back...



With the sewing machine, right sides together, I sewed three sides shut. Turned it right side out, stuffed a pillow in and hand sewed the final seam shut with the main color yarn. Here's the front:And the back...Not perfect, but at least it didn't end up in the landfill, nor did an old pillow no longer in service.

My good friend Candace came to my rescue with suggestions as to how to get along better with my SR 860, Silver Link 4 and DAK.
* My pattern of 140 stitches and 578 rows (80,920 stitches) was too large for the system to handle. (My Brother 970 wouldn't have blinked an eye, but o well.) Solution: download and knit a pattern this size in several sections, like 4 or 5.
* Knit really slowly so that the signals have a chance to get through. She said she can actually hear the row changing. Not the click that you hear when you've gone far enough with the carriage, but a different sound. Will have to try to listen for that.
* Turn off any screen saver or virus program that is likely to come on and interrupt.
* Get a laptop with Windows 98, 2000 or XP and use it exclusively with DAK. No internet. (Probably won't happen soon since we have too many computers around the house as it is. Unless I find a really good deal....) 98 is supposed to work the best.
* DAK was designed originally to work with Brothers, so the adaptations for Silver Reeds are not perfect. (Ha.)
* Check out Knitwords 30 and 31 for articles titled "Messing With Matthew" where Mary Anne Oger talks about the Silver Reed systems and DAK. (Matthew would be Matthew Bragg, creator of DAK.)

Thank you, Candace. I really appreciate your help and maybe these suggestions will help someone else.

I think I might need to move on from the 860 for a while. Not fun to have to work so hard on a project, but I guess it was worth something because I learned a bunch.

Compulsive, Obsessed, Determined, Crazy, Disappointed and Frustrated

That is an accurate description of my state of mind for the last 24 hours or so. Having knit the little swatch, and having successfully installed all the stuff for the Silver Link and Silver Reed, I thought I was good to go on my Peace scarf. The first couple of hundred rows out of the 586 were good! The chenille even behaved! Pretty, eh?

Then, for NO GOOD (or discernable) reason, DAK told me I was going the wrong way with the carriage! So, I pain-stakingly unraveled, did the GO TO RC thing and got going again. But then, it mispatterned all by itself, again for NO GOOD (or discernable) reason and I didn't discover it. Here's the bad: With a detailed pattern, it's hard to see from the backside if things are going ok or not. Well, they weren't going ok, as you can see.

Later, the demonic machine/link decided to shift the pattern over a few stitches, making this mess:

The steam coming out of my ears practically kept the house warm all night. I wrote to my Silver Reed guru friend for help. She said you have to wait for the click at the end of a row so that the next row can be made. (DID that.) Also, you have to knit slowly so that the signals get to the needle bed. (DID that because I also hung the contrast color over the end needle to prevent a hole and that took a couple seconds each row. I guess you have to program in the contrast color in the DAK pattern. If I'm wrong about that, would like some feedback.)

Like I said, I'm stubborn. So I went looking on the Yahoo DAK site for answers. Saw that people were having the same problem with my same setup, but no answers. So then I went to the Softbyte site. The latest update is 7.19.04. I had the previous one. SO, I updated. There were several things that pertained to better functioning of the Silver Reed setup, so I have my fingers crossed that this will be the answer to my problems.

If you are reading this and have the Silver Reed 860 and the Silver Link 4 and have any suggestions, I'd welcome the input with open arms.

I don't know if I have the umph today to try again. So many rows, so much frustration. Maybe I'll cut out the good parts---there seems to be enough length that I can get two pieces from---and make a pillow cover.

Fairisle with the Humungus Cone of Chenille Yarn

What an afternoon! I decided I would try knitting a scarf with this chenille I'm trying to use up, but do some fairisle. I have the Silver Reed 860 and the Silver Link 4. Still trying to develop a (good) relationship with this machine. Well, I had my pattern done in DAK, a modification of the Dale of Norway Peace design. Thought I'd knit it flat and seam it while watching a movie tonight. Ha! Got my yarns set up in the 860. Turned on DAK, hit the interactive knitting button. Nada. Nothing. Of course I've only knit a few fairisle things with this machine, last time about a year ago, so I could not remember for the life of me how to do this. I've downloaded to my Brother 970 millions of times and it has always worked so slick for me. After 30 minutes of frustration, I remembered this was not the computer I used when I did get it to knit interactively. That machine died and I had to switch to an extra XP computer we had sitting around here.

For some reason, it popped into my head that there was a driver involved. And it wouldn't have gotten installed on this new/ old computer. So I went hunting in my closet where I keep knitting supplies (the equipment kind) and found the DAK USB Driver. Another 30 minutes have passed. It's on a floppy disk, so I had to also hunt for the removable floppy disk drive. Found that, plugged everything in. For the longest time, nothing happened. Windows tried to install the driver and it said it was unsuccessful. Said the device might not work. Then the driver suddenly installed itself and all was hunky dory. Another 30 minutes have passed. Then the DAK disk said it had to upgrade my hardware. HUH?? I was sure some virus had taken over. But I didn't dare turn things off since it might be legit. It was.

Back in the DAK program, I went to set up for the Silver Reed 860 because it's set for a Brother 970. Believe it or not, the program found an available "virtual" com port all on its own. I guess the USB cables use a "virtual" com port. And I don't even know what I'm talking about. Then it was on to reading the help file. 30 more minutes down the drain. Got enough out of it to go ahead and knit a swatch.

Here it is after hours of fiddling. My 8" wide x 5" tall swatch. Could have knit that by hand 5 times over in the time this all took. But now I think I have it and next time will go more smoothly.

Not being familiar with the knit from screen process and not being comfortable with this machine, I decided I needed to eliminate the plain rows in the pattern so I don't have to switch out the yarns. The design suffers some, but I'm going with it so that I can get it done tonight.

I bet that next time I want to knit with the 970, I'll have to hunt for a new com port to work with that cable.

My, this is a boring post and you're probably thinking I'm one stubborn woman. A lesser woman would have given up by now, yes? My ulterior motive is to have a record of what I did so that next time I have to install this monster, I'll know what I did. If I have success with the scarf, I'll post a picture. So far it isn't biasing or worming. So that's amazingly good.

Look Ma! No worms! (A machine knit chenille success)

Thought I would try to make a fru fru scarf with my giganticus cone of chenille. It (the little swatch) turned out quite awful. All the loops wormed. Now, that wouldn't have been so bad if all the loops wormed the same way, but they didn't and the result was that it just looked like a wet mop. A well-used wet mop at that.

So, I decided to try knitting a scarf in rib, the only thing I've had success with using this yarn. In case you also have a 20 lb cone of the stuff and don't yet have the nerve to place it in a landfill, you might try my scarf. Here are the directions:
Machine: Silver Reed 860 with ribber
Yarn: Chenille approx. 16 ounces + serger thread (6,000 yard cone will make 3-4 scarves)
Tension: English rib ( kK1P1 rib or Double Rib by tucking the stitches on every other row on the ribber side) 4.6 st x 9 rows = 1” at T2/2
Finished size: 10.5 “ wide x 78” (6.5 feet) long
Notes:
• Odd as it may seem, the lower tension works better with the chenille. The carriage is easier to push and it helps prevent “worming”.
• The serger thread also helps prevent the “worming” but you can’t really see it, which is a good thing.
• Even though I used a lot of weight I yanked the knitting down every couple of rows for the first 50 rows. But after that, it knit smoothly.
• I’m not laundering this--- don’t want to take the chance that it will fall apart!
• You may need to weave in the two ends with a crochet hook. When I tried an embroidery, large-eyed needle, the yarn shredded.



DIRECTIONS
Thread serger thread through one eyelet on the mast and the chenille through the other. Circular cast on as per manual – Racking handle on P 4. R/R for circular cast on. Change to T 2/2 for scarf . Hang lots of weight and move the weights up every 50 rows. (I used 5 of the larger ribber weights!) Knit to RC 700. Change to tension 10/10, change settings to regular rib and knit one row to the left. Transfer ribber stitches to the main bed. Chain cast off including the serger thread. Weave in ends.

These same directions would work with other yarn---it was just a relief to have something turn out with this wily chenille. It's been a couple of hours now, and NO WORMING!! I might even be able to wear this thing. Such a pretty color! Such a weird "hand".

Fru Frueyness Scarf - a free machine knit pattern

Had a request to post the directions for a loopy fru fru scarf. It was on my blog at one time, but I must have deleted it. Be forewarned, it's not a fast knit, but it's kind of fun - if you like doing odd things on the machine like I do. You need some interesting yarn. This is made of one or two balls of ribbon yarn. It has some nice colors. Can't remember where I bought it, but most yarn shops have such a yarn. Most people have that one odd (expensive so you could only buy one, but it was irresistable) skein of yarn that was an impulse purchase and it sits in the closet not knowing what to do with itself. This project is ideal for such an orphan.

Some yarns will make a more decorative accessory; some will make a serviceable and warm scarf. It just occurred to me that I might use yarn from that giant cone of chenille to make the loops. Hmmmm......... as long as it never gets laundered, might work. Anyway, on to the instructions as to how to make this wonder of the knitting world.

DIRECTIONS
This fru fru-ness can be made on any machine. You need one hand knitting needle, a large one is preferable because it's easy to hang onto, but any will do. My first attempt was using the gate pegs of the ribber to do the loops, but I didn't like it as much as using a knitting needle because some splitting occurred on the sharp gate pegs and unless I wrapped the yarn really loosely, it was hard to pull the loops off the gate pegs. Also, the loops didn't get very long because even at the lowest position the distance from the main bed wasn't so great. For the main yarn choose a matching or coordinating color, a fairly thin yarn, any type, as many ounces as you want the scarf to be wide and whatever length will accommodate the novelty yarn length. How's that for helpful, precise information? (It’s best to have the main yarn be thin so that the scarf doesn’t get too heavy.) The tension you use on your machine needs to be loose enough to knit both the main and novelty yarns together. I used the largest T on the standard machine for the one pictured.

Here's the basic moves:
This is one of those things that is harder to describe than to do. Ewrap with main yarn over 7 or more needles. Knit 2 rows and hang a weight. Basically you are making use of the hand knitting needle to create loops that are of equal size and they are woven into a strip by wrapping the novelty yarn over the main bed needles. Position the hand knitting needle the same distance from the main bed each time it is used. The distance below the main bed that you position the needle horizontally will determine the length of the loops. Hang onto the knitting needle with your left hand, wrap the yarn and do the carriage with your right hand. Put the weaving brushes into work if your machine has them. You will wind over every other top N and down under the knitting needle, repeating across every other main bed needle.

Each row push out to E position the N that you are going to hang novelty yarn over to make it easier to wrap. You don’t have to e-wrap the main bed needles, just loop the yarn around. After winding across the needle bed, hang on to the end of the novelty yarn with one hand and push the carriage across with the other. Then remove the knitting needle and repeat but use the opposite main bed needles, every other one. You'll be knitting and wrapping in the opposite direction because the carriage will be on the other side, of course.

When the carriage is on the right, ready to knit, the hand knitting needle will have the empty point facing right. When the carriage is on the left, ready to knit, the hand knitting needle will have the point facing left. This way you can use the point to pick up the yarn more easily and pull it off the loops more easily. This will make more sense to you when you get going.

The drawing below shows you how to wind the yarn. You don’t need to use your row counter, unless you want a repeat performance in the future. You can just merrily knit until you run out of novelty yarn. Check occasionally to make sure the yarn isn’t caught up on the gate pegs.

Here's a closeup of the stitches. I think I used 7 main bed stitches for this scarf.

Machine Knit California Footies- free pattern

Who knew California could be so cold? I had some bulky boucle' yarn (acrylic) in my stash so decided to make my daughter some more footies to get her through the winter. The scans don't do them justice----they're really fluffy in person. Sorry, I lost the labels, but I'm pretty sure they were either Lion or Bernat brand. Probably purchased at JoAnn's or Michaels. If you'd like to try them, here's what I did for a size 6 women's foot. You would need to add/subtract stitches and rows for different sizes. They are super simple, from start to finish took about an hour. I used the purl side as the right side because the top cuff rolls slightly to the outside and the texture of the yarn hides the side seam. A little hard to seam with this yarn but when you do seam, the stitches nicely disappear. If you find it impossible because it breaks, use a matching color of smooth acrylic yarn and pull the seams tighter than normal so it disappears. 100% acrylic should not shrink in washer or dryer.
Machine: Bulky
Gauge: 3 st and 4 rows to one inch, T6
Yarn: Bulky boucle', just a few ounces main and contrast colors. One skein of each color should make a couple of pairs of footies.
Directions: Cast on 32 stitches at T6, a few rows WY and 1 row ravel cord. Leave a 12” yarn tail for seaming. With Main yarn K6 R, transfer every other st to neighbor for a picot edge. Leave empty N in work. K 6 R , hang hem from first row. T10 K 1 R to seal hem.
Ankle: T6 K 5 R.
Heel: Set lever(s) on carriage to HOLD. Push all N left of zero all the way out. Short row down to 6 st and back out until all N are in work. (Pull out a needle closest to the carriage, knit across. No need to wrap. Repeat. Then knitting back in, put needle opposite the carriage back to work, knit to the other side. Repeat.) Pick up heel of adjacent stitch to prevent hole both sides.
Foot: K 20R.
Toe: Exactly like heel. Pick up heel of adjacent stitch to prevent hole both sides. Set carriage to N both sides.
Knit 1 Row over all. Take stitches off on waste yarn.
Finishing: Kitchener st the toe from the purl side and seam the side as flat as you can manage. Remove the ravel cord and waste yarn.
Knit the other footie holding stitches on the opposite side. To have the carriage at the other side, K 6 Rows for the ankle.TIE: Ewrap over 3 N. T6, Knit 150 Rows, BO.
Thread through the hem beginning and ending at front. Cinch if desired, tie bow. At first I thought I wanted an I cord for the tie, but it was a big bother knitting an I cord with this yarn. It kept getting stuck on gatepegs or dropping stitches. Doing 3 stitches in a plain stockinette was fine because it ends up looking like an I cord anyway. The tie is decorative, but also if the ankle of the footie is too loose, this will help them stay on.

Hope I've given you enough info to try a pair. Often it's a matter of knitting one and then adjusting stitches and rows to suit.

First Machine Knit of 2011

I have some lovely Noro Kureyon in my stash and decided to make some of Midnattsol's slippers with it. You can see the pattern on her blog: http://hurpeknagg.blogspot.com/
Her pattern is for hand knitting, but since it's just a strip of rectangles, it's easily (and really quickly) done on the machine. I love the colors of Noro and they slide into one another even more deliciously when you felt the yarn. I used: Silver Reed midgauge, T10+, two skeins of Noro Kureyon, one for each slipper. Each rectangle was 24 stitches x 32 rows. These fit a women's size 9 American with socks on. Since I had to run the slippers through the wash four times to get it them to felt down small enough, if I were to make them again I'd do 22 stitches x 30 rows, or even a bit smaller.


Some hints if you want to make these slippers with this yarn: Noro is really "sticky" when used on a knitting machine so a lot of weight is required. Since each rectangle is not distinguishable from the next, run a strand of red yarn through the stitches after each rectangle is knit so you know where to sew the rectangles together. Unless you are a genius at origami, you should use 7 different colored yarn markers in the spots specified in the pattern to aid in sewing up. Finally, use a seaming technique that butts the rectangles together with a really flat seam. Doesn't even matter if it is beautiful. What matters is that it is flat so that when it felts, there isn't a bunched up seam. Pull out the red yarn at the very end of seaming. One thing I did which varies from the pattern is that I crocheted a single crochet row around the opening (after seaming is done) and then did a second row of backward crochet, also called a crab stitch. I thought it would add some stability to the cuff, but it wasn't really necessary.

This is the sole of the slipper. I kind of wish these colors were topmost, but it's almost impossible to predict.

I'm wearing them as I type. It's 11 degrees F outside and I'm toasty inside. I still have 4 skeins to use up. I think I'll knit a cowl but won't felt it. Stay tuned!